Philips CTX503WHT/00 manual Using your clock and timer Alarm, To set an alarm, To use an alarm

To change the ringtone, see "Adjusting ring settings to different scenes" on Page 61.

Using your clock and timer

Alarm

You can set up to five alarms.

To set an alarm

1.Check that your clock is correctly set (see "Set clock" on Page 12).

2.Go to Tools > Alarm.

The screen of alarm list appears.

3.Select an alarm, and press ,Edit to enter

the alarm setting screen.

On/Off: Press <or >to turn the alarm on or off.

Time: Set the alarm time.

Repeat: Repeat the alarm on one or some of

the weekdays or weekends. Or select Customize, press - and < or > to select a certain days, and then press L to select

or unslect the day.

Audio options: Select an alarm tone: Ringer or FM radio.

To use ringer as the alarm tone, press -, and then LOptions to select a ringtone; To use FM radio as the alarm tone, press -, and then LOptions to select a preset station in Channel List, or enter a radio station frequency in Manual Input. Snooze(Mins): Select an alarm interval: Default (5 minutes), or 1 - 10 minutes.

Alert type: Select how the alarm sounds at the set time.

4.Press ,Done when you finish setting the alarm.

To use an alarm

On the set alarm time, your alarm sounds. Select Stop: The alarm stops. If you have selected repetition mode for the alarm (see "To set an alarm" on Page 39), it will sound again at the set time.

Select Snooze: The alarm will sound again after the set Snooze(Mins) interval.