Philips 330 manual Explicit Call Transfer

end the conference with ). At this point all calls are disconnected. In order to make consecutive outgoing calls, first initiate a normal call with the first number of the conference. When the first member is on line, ini- tiate a second call as described in “Make a second call” above. When the second call is engaged, press ,and select Conference. Repeat the above process until five members are connected.

If there is an incoming call during the conference call, and if there is less than five members, you can accept this new call by pressing ,. Press ,again and then select Conference to add this member to the con- ference call. If there is an incoming call during a con- ference with five members already connected, you can answer this new incoming call, but not add it to the conference. While a conference call is in progress, press

,to access the Conf. members options. Disconnect

a member of the conference by selecting Remove party and pressing ,to confirm, or select Private call to have a private call with this member only (other mem- bers are put on hold)

Explicit Call Transfer

Subscription dependent

You can connect an active call and a call on hold. You are disconnected when the transfer is completed. During a call press ,, select Transfer and press ,.

This feature is different from the Call forward, which takes place before you pick up the call (see page 32).

68 Other operator services