Additional Hook Up Options, Connections | Philips 21B582BH specification

Additional Hook Up Options

BNC and USB Set Ups

BNC

Connections

BNC is another way to connect the monitor to the computer. This connection requires an optional BNC cable. It can be connected to either a Macintosh- or IBM-compatible computer. For those who work with graphics or designs, this option may be better.

Note: Be sure to flip the D-SUB/BNC switch to BNC when using this connection.

For an IBM-compatible computer:

1.Turn off the computer.

2.Connect the (optional) BNC monitor cable and set D-SUB/BNC switch to BNC.

3.Connect the shielded power cable.

4.Turn on the monitor. Then turn on the computer.

5.If you have Windows ’95, follow the “If you have Windows ’95” steps on the Setting Up foldout sheet.

For a Macintosh-type computer:

1.Connect the Mac adapter to one end of the monitor cable.

2.Turn off the computer.

3.Connect the (optional) BNC monitor cable and set D-SUB/BNC switch to BNC.

4.Connect the shielded power cable.

5.Turn on the monitor. Then turn on the computer.

D-Sub/BNC Switch

H/H+V	V	R	G	B	ISD-SUB
					BNC D-SUB

Refer to the “Setting Up your Philips monitor” foldout for a more detailed guide to setting up your monitor.

USB

Connections

USB (Universal Serial Bus) is an innovation in connecting your IBM-compatible computer to your monitor. By using the USB, you will be able to connect your keyboard, mouse, printer, and other peripherals to your monitor instead of having to connect them to your computer. This will give you greater flexibility in setting up your system. Plus, you will have true plug-and-play capability. While the software is still being developed, Philips has included the hardware so you will be ready to take advantage of this next generation in computer development.

For an IBM-compatible Computer:

1.Turn off the computer.

2.Connect the (optional) USB Hub and cable to the computer and to the monitor. (Computer must have USB port.)

3.Connect the shielded power cable.

4.Turn on the monitor. Then turn on the computer.

5.With the installation of the correct software, you will be able to connect specially-made peripherals to the monitor.

Note: USB Hub and cables sold separately. USB Bay exists in back of monitor.

H/H+V	V	R	ISD-SUB
			BNC D-SUB

USB

Refer to the “Setting Up your Philips monitor” foldout for a more detailed guide to setting up your monitor.