Location of Controls
6AUTO DIAL/STORE: Used for System/Personal Speed Dialling or storing programme changes.
7TRANSFER: Used to transfer a call to another party.
8REDIAL: Used to redial the last dialled number.
9MESSAGE: Used to leave a message waiting indication or call back the party who left the message waiting indication.
10 FLASH/RECALL: Used to disconnect the current call and make another call without hanging up.
11 HOLD: Used to place a call on hold.
12SP-PHONE (Speakerphone): Used for the hands-free operation.
13Navigator Key
14Volume Key 
.
To adjust Speaker/Handset/Headset/ Ringer Volume, press Up or Down.
15CANCEL
16PROGRAM
17ENTER
18Flexible Outside (CO) Line Buttons: Used to make or receive an outside call. Pressing this button seizes an idle outside line automatically. (Button assignment is required.)
Also used as feature buttons. (Button assignment is required.)
19Message/Ringer Lamp: When you receive an intercom call, the lamp flashes green, and on an outside call, the lamp flashes red. When someone has left you a message, the lamp stays on
red.
20Soft Buttons
Tilt Angle Adjustment
4
3
2
1
The tilt angle of the operation board can be adjusted to four
To lift: Lift up the operation board to the desired 
2 
3 
4).
To set down: Lift up the operation board to the highest angle and then press down to
fingers caught between the base unit and the operation board.
•Pull down the handset hook until it locks to prevent the handset from slipping down from the operation board when at the
— 8 —