Basic Operation
Basic Operation
Switching the Phone On/Off
To switch the phone on or off Z+Hold E
When the phone is switched on a greeting will be displayed and then the phone will go into Idle.
Making a Call
Ensure that the phone is switched on, the network operator logo is displayed and the signal strength meter shows network coverage is available in the current area.
1Enter area code and phone number
2Z D
International Dialling
Using the automatic international access code (+) you will be able to dial international numbers without having to know the code for the international exchange.
If the international number is known then it can be entered in the normal fashion followed by the area code and phone number.
List:
UK
UKR
URY
Ok
1From Idle Z+ Hold 0 until “+” is displayed
2Use e to cycle through the abbreviated
international names Z Q to choose the required code
3Enter area code and phone number
4Z D
Note: Many countries / regions include an initial “0” in the area code. This should, in most cases, be omitted when dialling international numbers. If you have difficulties making international calls, contact your Service Provider.
8