Panasonic RQT7114-2Y, SLDZ1200 manual Basic function settings, Instant play Instant Change

Basic function settings

operations	Selecting TURNTABLE mode or
Basic	CD PLAYER mode
	You can select to use the unit as a turntable, or as a CD player.

On the rear panel, switch [MODE] to either TURNTABLE or CD PLAYER

TURNTABLE : A mode for DJ play, all functions are useable.

•Panel data ( page 19) set on this unit is memorized on this unit.

•When using CD-R, CD-RW MP3 files, the total number of tracks and total album number are not displayed. Confirm by switch- ing to the CD PLAYER mode.

CD PLAYER:

The mode best suited for play as an audio player.

You can use DJ play functions excluding the following limited func- tions.

Limited functions

•Panel data cannot be automatically stored or read.

•The platter does not rotate. The platter slip surface cannot be operated.

•The auto cue and cue bank functions do not work.

•The instant change function does not work.

Automatic settings immediately after switching modes

•The RESET lamp comes on and returns to normal play speed.

•DJ play functions like dynamic effect and so on are automati- cally switched off.

Basic play operation ( page 12-13)changes
•In step 2, switch to the CD PLAYER side.
•In step 5, press [PLAY/PAUSE]	Total play time
and play of the first track begins,	(Hours, Minutes, Seconds)
and once the end of track is
reached the PLAY/PAUSE lamp
goes out and play stops.
Display indicator when stopped
When using CD, SD Audio:
Total play time is displayed.
When using CD-R, CD-RW MP3 files:
The total number of tracks and	Total number	Total number
total number of albums are dis-	of tracks		of albums
played.
•To start play
Press [PLAY/PAUSE].
•To stop play
Press [CUE STOP].
•To eject the CD

During play, you can also press the CD eject button to eject the disc.

14

Instant play (INSTANT CHANGE)

When in the TURNTABLE mode and Instant Change is off, the sound when starting and pausing is synchronized with the starting and stop- ping of the platter. When Instant Change is on, just like pressing [PLAY/ PAUSE] on a normal CD player, play is paused or starts instantly. This is a feature specific to digital turntables.

Press [INSTANT CHANGE]

•The INSTANT CHANGE lamp lights.

•Pressing [INSTANT CHANGE] again will cancel the setting.

•The Instant Change on or off setting for each CD or SD Memory Card is stored to memory, and the setting is restored once the set media is re-inserted.

Using the FREE WHEEL mode

While in TURNTABLE mode

Press [PUSH]

•The platter drive motor stops. When play-

ing, the platter comes to a gradual stop, and the sound playing is synchronized to the platters movement.

•The strobo illuminator light goes out, and FREE WHEEL indicator the FREE WHEEL indicator flashes in the

display.

•You can press [PUSH] again to release.

•Turning the power off will erase the settings.

Adjusting the platter brake

While in TURNTABLE mode, you can adjust the brake speed for the platter to come to a stop by pressing [PLAY/PAUSE] during play.

On the rear panel, turn [BRAKE]

S (Slow) direction : Slow stop

F (Fast) direction : Fast stop

Adjusting the auto cue level

When the Auto Cue function is on ( page 12), depending on the track, the auto cue point may not be set at the point just before where the audio begins. In this situation you can adjust the auto cue level.

1.Press and hold [•DISPLAY ANGLE –FUNCTION] for more than 2 seconds until the display changes

2.Press [] and from the display select “AUTO CUE LEVEL”

•“LEVEL –60 dB” appears in the display (initial settings example).

3. Press [– ], [+ ] and select the level:

•Select from –36 dB, –42dB, –48 dB, –54 dB, –60 dB, –66 dB,

–72 dB, –78 dB

•Sound that is lower than the set level is skipped as null sound.

4. Press [•DISPLAY ANGLE –FUNCTION]

•The selection is automatically set if you do not press [•DISPLAY ANGLE –FUNCTION] within 5 seconds.

•The set auto cue level for each CD or SD Memory Card is stored to memory, and the setting is restored once the set media is re- inserted.

RQT7114