Panasonic SLDZ1200, RQT7114-2Y manual Platter setup, Setup

Page 7

Platter setup

The stoppers are used to lock the platter, protecting the unit from shock during shipping.

1.Remove the 3 platter lock stoppers from the platter

Platter lock stoppers

Turn the platter lock stop- pers approximately 90°

Pull the platter lock stop- pers out

•Pull out the platter lock stoppers once they are aligned with the release hole.

2. Attach the slip surface (included)

Slip surface

Marker

Mounting pin

•With the marker on the slip surface facing up, attach onto the 2 mounting pins.

Store the 3 platter lock stoppers in a safe place after removal.

Adjusting the platter brake

You can adjust the platter brake speed using the BRAKE control on the rear of the unit. After connecting, adjust to the desired brake speed. ( page 14)

When transporting the unit

Make sure to re-attach the 3 platter lock stoppers.

1.Remove the slip surface

•Pack in a way to avoid bending the slip surface.

2.Insert the 3 platter lock stoppers

1.Align the platter holes with the chassis holes inside at the same position used to remove the stoppers above in step 1.

2.Insert the platter lock stoppers into the holes

•Move the platter to fully insert the stoppers.

3. Turn the platter lock stoppers approximately 90° to lock

Setup

Place the unit on a flat and stable surface that is not subject to vibrations or movement.

Note

•Do not place this unit on top of amplifiers emitting hot air or place near spot lights and use for any long duration. This may affect the unit or disc causing problems.

•Create space around this unit in order to assist heat release.

•Place the unit away from televisions and tuners to avoid interfer- ence. Interference will affect picture and sound quality.

•Placing the unit near speakers may result in undesired sound in an environment that requires elevated volume. In this case move the unit further away from the speaker(s) or turn the volume down.

•Place stereo connection cables, AC power supply cord and panel in a location that will not be affected by movement or vibration during play.

Undesirable sounds may result if there are movements or vibra- tions affecting the unit with exception of the legs.

Adjusting the height of the main unit

After placing the unit in the desired location for use, adjust the insula- tor so the main unit is flat and secure.

Changing the display angle

Change display angle corresponding to position of the main unit. ( page 11)

Before use

7

RQT7114

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Direct Drive Digital Turntable Product service Table of contentsUse Listening cautionBefore use Important Safety InstructionsRear panel Main featuresControl panel Front panelRear panel Component part namesControl panel Front panelSetup Platter setupConnections Connecting with the DJ mixerConnecting with other mixers Listening with the headphonesConnecting with the stereo amplifier Not using the DJ mixer Connecting the control terminals for relay playConnecting to equipment with digital input terminals Inserting-removing a disc or SD Memory Card Changing the display angle Display indicatorAdjusting the display contrast Displaying the remaining timePlaying CD-R and CD-RW discs Auto Cue function Turntable mode onlyTurn Volume Playing a CD or SD Memory Card basic playInsert a disc or SD Memory Card Press Power OFF onSwitch Mode to Turntable Switch Play Select to select the me- dia to be usedAdjusting the auto cue level Basic function settingsUsing the Free Wheel mode Adjusting the platter brakeAdvanced Platter operationsChanging play with your hand Basic play for DJsReverse play Reversing the platter Changing tempo and direction of playChanging tempo Locking the pitchStoring the auto cue point to cue bank memory Setting the cue point at any pointSetting the auto cue point Playing from memoryStore desired points to memory and play loop play Playing from memoryPlay from the stored point Storing to the CUE Pads and playingRecording to the Sample Pads in real-time Select play mode and playRecording to the Sample Pads and playing Erasing cue pad, sample pad, loop play dataFormance Changing the soundChanging sound to simulate analog Change sound with combined perSave the data Saving to a SD Memory Card, RecallingSaving to a SD Memory Card Insert a SD Memory CardPress Execute to proceed Saving to a SD Memory Card, RecallingFormatting the SD Memory Card Regarding MP3 albums and SD audioUsing the amplifier and other equipment Using with other equipmentStart play using the mixer’s fader Using two units for relay playInitializing this unit’s memory Unit’s initialize memory functionGlossary Linking different tracksConcerning CDs Handling SD Memory CardsSuitable SD Memory Cards Reference Frequently asked questionsTroubleshooting guide Problem Cause SolutionTo clean this unit, wipe with a soft, dry cloth Error messagesMaintenance SpecificationsLimited warranty only for U.S.A Panasonic/Technics DJ Products Limited WarrantyCorporation of North America

SLDZ1200, RQT7114-2Y specifications

The Panasonic SLDZ1200, model RQT7114-2Y, is a cutting-edge component designed to revolutionize the home entertainment experience. This model stands out for its remarkable combination of features, advanced technologies, and user-friendly characteristics, making it a preferred choice for audio enthusiasts and casual listeners alike.

At the heart of the SLDZ1200 is its superior audio processing technology, which ensures exceptional sound clarity and depth. This model supports various audio formats, allowing users to enjoy their favorite tracks in high fidelity. Additionally, the built-in digital signal processor optimizes sound output according to the listener's environment, delivering rich and dynamic audio that can fill any room.

One of the defining features of the SLDZ1200 is its seamless connectivity options. With USB ports and Bluetooth capabilities, users can easily connect their smartphones, tablets, or other audio devices to the system. This wireless convenience allows for streaming music directly or playing tracks stored on portable devices, enhancing versatility and ease of use. The inclusion of an auxiliary input also means legacy devices can be connected without any hassle.

The SLDZ1200 is equipped with an intuitive interface, allowing users to navigate through functions effortlessly. The well-designed remote control provides access to all key features, making it simple to adjust settings or switch between audio sources. This user-centric design ensures that anyone, regardless of technical expertise, can enjoy the full range of capabilities the unit offers.

In addition, the SLDZ1200 features advanced sound customization options, including equalizer presets for various music genres. Users can fine-tune sound settings to match their personal preferences, ensuring a tailored listening experience. The model also supports surround sound options, transforming any audio output into an immersive environment that resembles a live concert or cinema-like experience.

Durability and design are other important aspects of the SLDZ1200. Constructed with high-quality materials, it promises longevity while maintaining a sleek and modern aesthetic that complements any living space. The compact design allows for easy integration into home setups without taking up excessive space.

In conclusion, Panasonic's SLDZ1200, RQT7114-2Y, masterfully combines innovative technology and user-friendly features to deliver an unparalleled audio experience. Whether for casual listening or serious audiophile pursuits, it represents a significant step forward in home entertainment solutions.
Top Page Image Contents