Panasonic SLDZ1200, RQT7114-2Y manual Playing from memory, Setting the cue point at any point

Page 17

Playing from memory

Before use

•Switch [PLAY SELECT] to select the media to be used

•Turn [MODE] on the rear panel to TURNTABLE

•Insert the SD Memory Card or CD to be used

Setting the cue point at any point

You can set a cue point at any point of a track and easily recall any desired cue point.

You can save up to 10 cue points from one CD or one SD Memory Card to cue bank memory.

1. Press [– + BANK] to select the cue bank

•Once a point has been stored to a cue

 

 

 

 

bank (1-10), the cue bank number in-

 

 

(e.g.) cue point is stored

dicator in the display reverses display.

in memory

 

2. During play or while paused, press [REALTIME REC]

•All the SAMPLE PADS, CUE PADS 1-4 pad lamps and the CUE lamp flash.

•Press [REALTIME REC] again to cancel.

3.Turn the platter slip surface to position play to start just before the beginning of audio

•If the cue point is set at an audible point, the point immediately following becomes the cue point.

•Make certain the platter slip surface is completely stopped.

4.Press [CUE STOP]

•The CUE lamp lights, the selected cue bank number reverses display and is stored in memory.

•When the reverse displayed cue bank number is selected, it is overwritten.

5. Repeat the above steps to store additional cue points

•The cue bank for each CD or SD Memory Card is stored to memory, and the setting is restored once the set media is re-inserted.

Setting the auto cue point

You can automatically set the auto cue point and pause just before the beginning of the audio you want to play.

1 When Auto Cue is off

Press [•REMAIN -AUTO CUE] for more

than 2 seconds until “” appears in the display

2 Perform track skip or play to move to the beginning of the track you want to set

•The unit pauses just before the beginning of the track’s audio, the CUE lamp lights and the auto cue point is set.

•“” is displayed in the cue bank display.

•After returning to the set point, the play point is moved in synchro- nization with the platter slip surface. When you reverse the platter slip surface with your hand and when the platter slip surface has moved back to the previous track because of the brake setting, pressing [PLAY/PAUSE] to begin play stops play again at the auto cue point.

•The CUE lamp flashes several seconds immediately after setting and platter slip surface operation may not be possible.

•Setting again erases previous auto cue points.

Storing the auto cue point to cue bank memory

1.Set the auto cue point ( indicated above)

•“” appears in the cue bank indicator display.

2.Perform step 1, 2, 4 in the Setting the cue point at any point section ( right side of page)

•The selected cue bank number reverses display and is stored in memory.

•If you do not select the cue bank, a “CUE BANK ERROR” mes- sage appears in the display. Select the cue bank and re-set.

 

operations

Play from the stored point

 

Before use:

 

•When using the auto cue point

 

When “ ” does not appear in the cue bank number display

Advanced

•Select the cue bank of the number indicator that has reversed in

Set the auto cue point ( left side of page)

 

•When using the cue point

 

Press [– + BANK] and select the desired cue bank

 

the display.

 

•You cannot select “ ” by pressing [– + BANK].

 

Returning to the auto cue point, cue point (Back cue)

When Instant Change is off

During play or while paused, stop the platter slip sur- face and press [CUE STOP]

•The unit returns to the set point, the PLAY/PAUSE lamp flashes and play pauses.

•You cannot operate the platter slip surface for several seconds immediately after back cueing.

•During play, pressing [CUE STOP] without stopping the platter slip surface, will move the play point in synchronization with the platter slip surface after having returned to the set point.

When Instant Change is on

During play or while paused, press [CUE STOP]

•During play, without stopping the platter slip surface the unit re- turns to the set point.

•Immediately following platter slip surface operation the INSTANT CHANGE lamp flashes and after several seconds sound is output.

17

RQT7114

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Direct Drive Digital Turntable Product service Table of contentsUse Listening cautionBefore use Important Safety InstructionsControl panel Main featuresFront panel Rear panelControl panel Component part namesFront panel Rear panelSetup Platter setupConnecting with other mixers Connecting with the DJ mixerListening with the headphones ConnectionsConnecting to equipment with digital input terminals Connecting the control terminals for relay playConnecting with the stereo amplifier Not using the DJ mixer Inserting-removing a disc or SD Memory Card Adjusting the display contrast Display indicatorDisplaying the remaining time Changing the display angleTurn Volume Auto Cue function Turntable mode onlyPlaying a CD or SD Memory Card basic play Playing CD-R and CD-RW discsSwitch Mode to Turntable Press Power OFF onSwitch Play Select to select the me- dia to be used Insert a disc or SD Memory CardUsing the Free Wheel mode Basic function settingsAdjusting the platter brake Adjusting the auto cue levelChanging play with your hand Platter operationsBasic play for DJs AdvancedChanging tempo Changing tempo and direction of playLocking the pitch Reverse play Reversing the platterSetting the auto cue point Setting the cue point at any pointPlaying from memory Storing the auto cue point to cue bank memoryPlay from the stored point Playing from memoryStoring to the CUE Pads and playing Store desired points to memory and play loop playRecording to the Sample Pads and playing Select play mode and playErasing cue pad, sample pad, loop play data Recording to the Sample Pads in real-timeChanging sound to simulate analog Changing the soundChange sound with combined per FormanceSaving to a SD Memory Card Saving to a SD Memory Card, RecallingInsert a SD Memory Card Save the dataFormatting the SD Memory Card Saving to a SD Memory Card, RecallingRegarding MP3 albums and SD audio Press Execute to proceedStart play using the mixer’s fader Using with other equipmentUsing two units for relay play Using the amplifier and other equipmentGlossary Unit’s initialize memory functionLinking different tracks Initializing this unit’s memorySuitable SD Memory Cards Handling SD Memory CardsConcerning CDs Troubleshooting guide Frequently asked questionsProblem Cause Solution ReferenceMaintenance Error messagesSpecifications To clean this unit, wipe with a soft, dry clothCorporation of North America Panasonic/Technics DJ Products Limited WarrantyLimited warranty only for U.S.A

SLDZ1200, RQT7114-2Y specifications

The Panasonic SLDZ1200, model RQT7114-2Y, is a cutting-edge component designed to revolutionize the home entertainment experience. This model stands out for its remarkable combination of features, advanced technologies, and user-friendly characteristics, making it a preferred choice for audio enthusiasts and casual listeners alike.

At the heart of the SLDZ1200 is its superior audio processing technology, which ensures exceptional sound clarity and depth. This model supports various audio formats, allowing users to enjoy their favorite tracks in high fidelity. Additionally, the built-in digital signal processor optimizes sound output according to the listener's environment, delivering rich and dynamic audio that can fill any room.

One of the defining features of the SLDZ1200 is its seamless connectivity options. With USB ports and Bluetooth capabilities, users can easily connect their smartphones, tablets, or other audio devices to the system. This wireless convenience allows for streaming music directly or playing tracks stored on portable devices, enhancing versatility and ease of use. The inclusion of an auxiliary input also means legacy devices can be connected without any hassle.

The SLDZ1200 is equipped with an intuitive interface, allowing users to navigate through functions effortlessly. The well-designed remote control provides access to all key features, making it simple to adjust settings or switch between audio sources. This user-centric design ensures that anyone, regardless of technical expertise, can enjoy the full range of capabilities the unit offers.

In addition, the SLDZ1200 features advanced sound customization options, including equalizer presets for various music genres. Users can fine-tune sound settings to match their personal preferences, ensuring a tailored listening experience. The model also supports surround sound options, transforming any audio output into an immersive environment that resembles a live concert or cinema-like experience.

Durability and design are other important aspects of the SLDZ1200. Constructed with high-quality materials, it promises longevity while maintaining a sleek and modern aesthetic that complements any living space. The compact design allows for easy integration into home setups without taking up excessive space.

In conclusion, Panasonic's SLDZ1200, RQT7114-2Y, masterfully combines innovative technology and user-friendly features to deliver an unparalleled audio experience. Whether for casual listening or serious audiophile pursuits, it represents a significant step forward in home entertainment solutions.
Top Page Image Contents