Disassembly | E1000 |
Removing and Replacing the Rear Housing
To remove the rear housing
1.Follow the procedures in this section to remove the:
•Battery door
•Battery
•SIM card
•Front housing
2.Lift the transceiver board from the bottom and out of the rear housing.
Rear Housing
Transceiver Board
Figure 7. Rear Housing Removal
To replace the rear housing
1.Insert the front of the transceiver board into the rear housing and press it into place.
2.Follow the procedures to replace the:
•front housing
•SIM card
•battery
•battery door
22 | October 4, 2004 | 6809490A73 |