![](/images/new-backgrounds/1297495/29749551x1.webp)
Disassembly | E1000 |
Removing and Replacing the Speaker Assembly
To remove the speaker assembly
1.Follow the procedures to remove the:
•Battery door
•Battery
•SIM card
•front housing
•rear housing
2.Using a Torx driver with a
3.Lift the assembly off of the transceiver board.)
Figure 11. Removing the Speaker Assembly.
To replace the speaker assembly
1.Align the speaker assembly with the transceiver board and press it into place.
2.Insert and tighten the 2screws to a torque setting of 1.2 in/lbs, using the
3.Follow the procedures to replace the:
•rear housing
•front housing
•SIM card
•battery
•battery door
26 | October 4, 2004 | 6809490A73 |