Motorola C350 manual Using Hands-Free Features, Making Data and Fax Calls

Setting	Description
Received Calls	Amount spent on calls you
	received since the last time you
	reset this cost tracker.
All Calls	Amount spent on all dialed and
	received calls since the last time
	you reset this cost tracker.
	You can reset this value separate
	from Dialed Calls and
	Received Calls, so Dialed Calls
	plus Received Calls may not
	equal All Calls.
To reset the cost tracker:
Press	To
1 RESET (+)	reset the cost (if available)
2 OK (-)	enter your PIN2 code to
	confirm the reset

Adjusting Call Cost Settings

You can set a credit limit so that the phone

displays your remaining credit during calls. The

phone notifies you when you near your limit, and ends the call when you reach it.

Find the Feature	M> Settings
	> In-Call Setup
	> Call Cost Setup

Using Hands-Free Features

You can purchase an optional Motorola Original™ Easy-Install Hands-Free Kit for your car. This accessory provides an alternative way for you to use your phone without using your handset.

Note: The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.

Setting Automatic Answer

You can set your phone to automatically answer calls after two rings (four seconds) when connected to the Easy-Install Hands-Free Kit or a phone headset.

Find the Feature	M> Settings
	> Other Settings
	> Car Settings or
	Headset
	> Auto Answer

Making Data and Fax Calls

An optional Motorola Original™ data kit lets you transfer data between your phone and a computer or other external device. You can:

•use your phone to make and answer data and fax calls on your computer or hand-held device.

•use your phone as a modem to connect to the Internet

Note: 56K modems are capable of receiving 56Kbps from a compatible service provider. Receiving is currently limited in the U.S. and Canada to 53 Kbps, and transmitting to 33.6 Kbps. Actual speeds will vary depending on line conditions.

Making a Cable Connection

Installing the Software

To transfer data between your phone and computer, you must install the software included with the Motorola Original data kit. See the data kit’s user guide for more information.

Attaching the Cable

Use a Motorola Original USB cable to connect your phone to the external device.

Note: Your phone requires a mini-USB connector. Check your computer or hand-held device to determine the type of cable you need.

To Attach a Serial Cable

1Use the interchangeable head on the Motorola Multi-Connect Serial Cable to connect a computer, Palm III device, or Palm V device to your phone. Plug the serial cable into the detachable head. Make sure that the Motorola logo on the detachable head and the metal shielding on the serial cable plug are both facing you.

2With the Motorola logo and the phone both facing you, plug the detachable head into your phone’s accessory connector port.

3Plug the other end of the cable into the serial interface connection on the external device and tighten the screws.

To Attach a USB Cable

1Plug the end of the cable with the Motorola logo into your phone’s accessory connector port. Make sure that the logo and the phone are both facing you.

2Plug the other end—the USB connection—into the USB port on the external device.

Making a Data or Fax Call

Use this feature to transfer data from your computer onto another device.

Getting More Out of Your Phone

19