U-Line BI-95 Exterior Cleaning, Inspect and Plan, General Precautions, Tools/Materials Required

Page 3

BI-95 Ice Maker

General Precautions

Use this appliance for its intended purpose only and follow these general precautions along with those listed throughout this guide:

WARNING

SHOCK HAZARD — Electrical Grounding Required.

Keep the unit unplugged throughout installation except during testing.

Never remove the round grounding prong from the plug and never use a two-prong grounding adapter.

Never use an extension cord to connect power to the unit.

Always keep your working area dry.

2 Inspect and Plan

You have received a carton containing your BI-95 Ice Maker with a package inside containing a User Manual, a Product Registration Card and water connection parts. Complete and mail the Product Registration Card or register online at www.U-LineService.com. Once your unit is installed, keep the User Manual and this Installation Guide in a safe place for future reference.

BI-95 units are available in vinyl clad cabinets with matching doors which have a slightly contoured handle across the top and are reversible. The doors have recessed front panels that will accept a custom 1/4 inch thick door panel.

Please carefully follow the directions that apply to your unit and your intended design.

CAUTION

Use care when moving and handling the unit. Use gloves to prevent personal injury from sharp edges.

Do not lift the unit by the door or door handle.

Do not install the unit behind closed doors or in any way that would obstruct airflow to the front grille, which may cause the unit to malfunction.

Tools/Materials Required

Screwdrivers — slotted and Phillips head

1/4-inch OD copper tubing and shut-off valve for water supply line

1/4-inch thick door panel material and cutting tools

Inspection

Unwrap and inspect the unit on a flat, level surface capable of supporting its entire weight.

Exterior Cleaning

(As Required)

Black and White Models:

Black and white surfaces may be cleaned with a mild detergent and warm water solution. Do not use solvent- based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft, clean towel to prevent water spotting.

02/2005

3

www.U-LineService.com

Image 3
Contents BI-95 Ice Maker Follow Safety Precautions ContentsTools/Materials Required Exterior CleaningGeneral Precautions Inspect and PlanPrepare Site Cut-Out DimensionsProduct Dimensions Door Swing/Clearances InformationReversing the Door Prepare and Install Door Panel Custom 1/4 Thick Door Panel InsertOther Site Requirements Checking Door Alignment Adjust DoorPrepare Plumbing Water Supply ConnectionLevel the Unit Electrical SpecificationsPrepare Power Supply Leveling InformationInstall the Unit Installation of the BI-95Grille Installation Installation TroubleshootingStart-Up Troubleshooting Initial Start-UpStart-Up for the First Time Who to Call Service Information