U-Line BI-95 manual Electrical Specifications, Leveling Information, Prepare Power Supply

Page 9

BI-95 Ice Maker

7 Prepare Power Supply

Electrical Specifications

CAUTION

Electrical installation must observe all state and local codes. This unit requires connection to a grounded (three- prong), polarized receptacle that has been placed by a qualified electrician.

8 Level the Unit

Leveling Information

IMPORTANT

It is extremely important that the unit sits on a level surface, as it does not have feet levelers. If it is not level, the ice mold will not fill evenly.

The unit requires a grounded and polarized 115 VAC,

60 Hz, 15A power supply (normal household current). An individual, properly grounded branch circuit or circuit breaker is recommended. GFCI (ground fault circuit interrupter) is usually not required for fixed location appliances and is not recommended for your unit because a GFCI could be prone to nuisance tripping. However, be sure to consult your local codes.

See Figure 19 for recommended receptacle location.

18-1/2"

Minimum

7"

1-1/2"

Figure 19

WARNING

SHOCK HAZARD — Electrical Grounding Required.

Never remove the round grounding prong from the plug and never use a two-prong grounding adapter.

Never use an extension cord to connect power to the unit.

Go on to 8 Level the Unit.

Use a level to check the levelness of the unit from front to back and from side to side. Level should be placed along top edge and side edge as shown (see Figure 20). Go on to

9 Install the Unit.

Check

Level

Figure 20

02/2005

9

www.U-LineService.com

Image 9
Contents BI-95 Ice Maker Follow Safety Precautions ContentsGeneral Precautions Exterior CleaningInspect and Plan Tools/Materials RequiredProduct Dimensions Cut-Out DimensionsDoor Swing/Clearances Information Prepare SiteReversing the Door Prepare and Install Door Panel Custom 1/4 Thick Door Panel InsertOther Site Requirements Checking Door Alignment Adjust DoorPrepare Plumbing Water Supply ConnectionPrepare Power Supply Electrical SpecificationsLeveling Information Level the UnitGrille Installation Installation of the BI-95Installation Troubleshooting Install the UnitStart-Up Troubleshooting Initial Start-UpStart-Up for the First Time Who to Call Service Information