Sony Ericsson NWZ-A828K NANDCEZ0, LCDB0, LCDG4, LCDG5, LCDR0, LCDR1, Vmicin, SDRDQM0, Resetz, Cko

NWZ-A826/A826K/A828/A828K/A829

Pin No.	Pin Name	I/O	Description
M9	NAND_CEZ0	O	Chip enable signal output to the NAND flash memory
M10	GND	-	Ground terminal
M17, M18	GND	-	Ground terminal
M19	LCD_B0	O	RGB video (blue) signal output to the liquid crystal display
M22 to	LCD_G0 to LCD_G3	O	RGB video (green) signal output to the liquid crystal display
M25
M26	NC	-	Not used
N1 to N5	SDR_DATA12 to	I/O	Two-way data bus with the SD-RAM
	SDR_DATA8
N8	SDR_DATA7	I/O	Two-way data bus with the SD-RAM
N9, N10	GND	-	Ground terminal
N17 to	GND	-	Ground terminal
N19
N22, N23	LCD_G4, LCD_G5	O	RGB video (green) signal output to the liquid crystal display
N24, N25	LCD_R0, LCD_R1	O	RGB video (red) signal output to the liquid crystal display
N26	VMICIN	I	Power supply input terminal (+2.9 - 4.2V)
P1 to P4	SDR_DATA5 to	I/O	Two-way data bus with the SD-RAM
	SDR_DATA2
P5	SDR_DQM0	O	Write mask signal output to the SD-RAM
P8	SDR_DATA6	I/O	Two-way data bus with the SD-RAM
P9	GND	-	Ground terminal
P10	RESETZ	O	Reset signal output to the USB controller
P17 to P19	GND	-	Ground terminal
P22	LCD_R3	O	RGB video (red) signal output to the liquid crystal display
P23	LCD_PXCLK	O	Pixel clock signal output to the liquid crystal display
P24	NC	-	Not used
P25, P26	IO_A	-	Not used
R1	SDR_DATA0	I/O	Two-way data bus with the SD-RAM
R2 to R4	SDR_DQM3 to	O	Write mask signal output to the SD-RAM
	SDR_DQM1
R5	SDR_WEZ	O	Write enable signal output to the SD-RAM
R8	SDR_DATA1	I/O	Two-way data bus with the SD-RAM
R9	GND	-	Ground terminal
R10	NC	-	Not used
R17	U70_CTSZ	O	CTS signal output to the bluetooth controller
R18	U70_RTSZ	I	RTS signal input from the bluetooth controller
R19	GND	-	Ground terminal
R22, R23	LCD_R2, LCD_R4	O	RGB video (red) signal output to the liquid crystal display
R24	GNDSINK	-	Ground terminal
R25	VDD_L0	I	Power supply input terminal (+1.2V)
R26	NC	-	Not used
T1	SDR_CKE0	O	Clock enable signal output to the SD-RAM
T2	NC	-	Not used
T3	SDR_CSZ0	O	Chip select signal output to the SD-RAM
T4	SDR_BA1	O	Bank address signal output to the SD-RAM
T5	SDR_RASZ	O	Row address strobe signal output to the SD-RAM
T8	NC	-	Not used
T9	GND	-	Ground terminal
T10	NC	-	Not used
T17	U70_SOUT	O	Serial data output to the WM-PORT connector and bluetooth controller
T18	U70_SRIN	I	Serial data input from the WM-PORT connector and bluetooth controller
T19	GND	-	Ground terminal
T22	LCD_R5	O	RGB video (red) signal output to the liquid crystal display
T23	NC	-	Not used
T24	C_TMS	I	Mode selection signal input terminal for JTAG
T25	VLOG	O	Power supply output terminal (+1.8V)
T26	CKO	O	Main system clock output terminal (11.2896 MHz)

38