Siemens M30 manual Battery and charging, Insert battery, Getting started, Charge battery

6

Battery and charging

Insert battery Remove battery

Getting started Getting started

Charge battery

7

Remove the battery lid (1) by sliding it downwards.

Insert the battery by placing first the upper part (2) and then the lower part (3) in the recess.

Remove the battery lid by slid- ing it downwards.

Lift the lower part (1) of the battery and remove it.

Insert the charger plug in the bottom of the telephone, and it will start charging immedi- ately.

After 1.5-2 hours the battery will be fully charged.

Facts & Tips

Facts & Tips

• During charging, the two bars in the

battery indicator on the phone display

will be flashing. It might, however

take about 5 minuttes before you can

see these symbols in your display.

• When the battery is fully charged,

the bars in the battery indicator will

stop flashing.

• To obtain optimum battery perform-

ance in daily use, wait until the bat-

tery is discharged before recharging

to full capacity.

Slide the battery lid in place.

•When removing the battery, your phone should always be switched off.

•The on/off key is the left-hand func- tion key on your phone

• Your phone needs recharging, when

there are no more black bars shown

in the battery indicator in the top of

the display.