VTech VT 9162 Basic Operation, Making Calls, Volume Control, Channel Changing, Pre-dialing

BASIC OPERATION

MAKING CALLS

Method 1------ Live Dialing

Press PHONE. Dial the phone number.

Press OFF to end your call.

Method 2------ Pre-dialing

Dial the phone number. Use thekey to backspace if you make a dialing mistake. Then press PHONE.

Press OFF to end your call.

When the handset is in use, the IN USE/CHARGE light on the Base Unit will flash. When the Handset is in the Base Unit cradle, the IN USE/CHARGE light glows steadily.

VOLUME CONTROL

While you are on a call, press	to raise the inbound volume and	to lower it. The handset
will display the relative volume setting as you adjust it.

CHANNEL CHANGING

If you experience noise or interference while on a call, you may be too far from the Base Unit, or in an obstructed area. Try moving to a different location. If this does not improve the transmission, press PROG/CHAN. You can press this key more than once, if necessary.

NOTE: This feature only operates while you are on an active call.

BASIC OPERATION

11