VTech VT 9162 Set Announce Only, Set Base Ringer On/Off, Set Number of Rings, Toll Saver

Page 23

ANSWERING SYSTEM SETUP

Set Announce Only

CAUTION:

If you turn on the Announce Only option, your callers cannot leave a message.

1.Press MENU until "Set Announce Only" is announced.

2.Press SELECT until desired setting "ON" or "OFF" is declared.

3.Press TIME/SET to confirm, and the setting will be announced.

Note: You can store one OGM for Announce Only mode, and a separate OGM for Normal (accept messages) mode. The appropriate OGM will be played based on how you set Announce Only.

Set Base Ringer On/Off

The Base ringer can be turned on or off.

1. Press MENU until you hear "Set Base

Ringer"

2. Press SELECT to toggle between the

choices (ON or OFF).

3. Press TIME/SET to confirm your sel-

ection. Voice prompt of "Base Ringer

is on" or "Base Ringer is off" will be

announced to confirm your setting.

Set Number of Rings

The Answering System has 4 ring type settings:

2 rings The incoming call is answered after 2 rings. 4 rings The incoming call is answered after 4 rings. 6 rings The incomng call is answered after 6 rings.

Toll Saver

The incoming call is answered after 2 rings only if there are new messages/memos present. Otherwise, the call is answered after 4 rings. This may help you avoid long distance charges when retrieving messages remotely.

1.Press MENU until you hear "Set number of rings."

2.Press SELECT until you hear the desired setting "2", "4", "6", or "Toll Saver".

3.Press TIME/SET to confirm your choice. The selected setting is then announced.

Itad Operation

23

Image 23

Contents Table of Contents Additional Information Important Safety Instructions Parts Check List Parts Check ListHandset Layout Telephone Line Jack VolumeBase Unit Layout Mailbox PLAY/STOPGetting Started Installation of Battery Pack in HandsetAnswering System Introduction Getting Started Setting UP Your VT9162Ringer Selection TONE/PULSE SelectionWall Mounting If the display says It means Getting Started Handset DisplayChannel Changing Volume ControlBasic Operation Making CallsFlash Using RedialAnswering Calls Hold Review Caller ID Caller ID/CALL Waiting IDReceiving and Storing Calls About Call HistoryStore a Caller ID Record in Phone Book Memory Caller ID /CALL Waiting IDDeleting Records from Call History Dial a Displayed NumberScreen Display When Display Screen MessagesDial Key Phone BookStore Memory Numbers Dial Memory Numbers Edit Numbers Stored in MemoryDelete Numbers Stored in Memory Belt Clip InstallationOperation Set Outgoing Message OGM Answering System SetupAnswering System Programming Overview Set Security Code Recording / Playing / Deleting the Out- going Messages OGMSet Audible Message Alert Day and TimeToll Saver Set Announce OnlySet Base Ringer On/Off Set Number of RingsListening to Messages / Memos Answering System OperationsLeaving a Message Incoming Message An incoming message can be a maximum of 4 minutesTurning the Answering Machine ON/OFF Saving MessagesDeleting Messages Changing Playback Speed Changing Speaker VolumeCheck Current Day and Time Memory Full Power FailureAuto Disconnect for Extension Phone Pick-up LED displays What it means Answering System OpterationsRepeat Messages During Playback Remote Operation of Answering SystemPlaying Messages Remotely Change OGM Remotely Skip Messages During PlaybackStop Message Playback Memo RecordingExiting Remote Operation Voice Menu for Remote OperationMaintenance No Dial Tone Case of DifficultyPhone DOESN’T Work AT ALL Common Cure for Electronic Equipment Handset does not Ring When YOU Receive a CallYOU Hear Other Calls While Using Your Phone Your Caller Fades in and OUTWhat does this limited warranty cover? Warranty StatementHow do you get warranty service? FCC Part FCC and IC RegulationsVTech Communications Inc Rights of the telephone company Programming/testing of emergency numbersFCC and Acta Information Repair instructionsThis telephone is registered for use in Canada IC Industry CanadaRbrc R Seal Technical Specifications Issued