Uniden D1685 manual Getting Started, Installing Your Phone

Page 3

Getting Started

Installing Your Phone

Charge the Battery

1. Unpack all handsets, battery packs, and battery covers. If

you need to remove a

cover, press

in on the notch and slide the cover down and off.

2.Line up the battery connector with the jack inside the handset; the connector only fits one way.

3.Push the connector in until it clicks into place; tug gently on the wires to make sure the battery is securely connected.

4.Replace the battery cover and slide it into place.

5.Use an AC adapter to connect the power jack on the base to a regular indoor (120V AC) power outlet.

Connect any chargers the same way.

6.Place a handset in the base with the display facing forward. If the display doesn’t light up, reseat the handset or connect the base to

a different outlet. For 2 or more handsets, place each handset in a charger.

#Charge all handsets completely#

(about 15 hours) before using.

Connect the Telephone Cord

Use the telephone cord to connect the TEL LINE jack on the base to a standard telephone wall jack.

Test the Connection

1.Pick up the handset and press Talk/ Flash. The handset sounds a dial tone, and the display shows Talk.

––If you don't hear a dial tone or the display says Check Tel Line, check the connection between the base and the phone jack.

2.Make a quick test call. (Press End to hang up.)

––If you keep hearing a dial tone, change to pulse dialing.

––If there’s a lot of noise, check for interference (see page 19).

3.Test all handsets the same way. If you can't get a dial tone, move the handset closer to the base.

Changing to Pulse Dialing

Your phone uses tone dialing by default. If your phone company uses pulse dialing, you need to change your phone’s dial mode.

1.Press Menu/select and choose Global Setup.

2.Select Dial Mode then Pulse. You’ll hear a confirmation tone.

To send DTMF tones during a call (e.g., for an automated response system), press * to temporarily switch to tone dialing. When you hang up, the phone automatically returns to pulse dialing.

English - 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents If You Contact Uniden’s Phone Number D1685 Series Users GuideWhats in the box? You will also findWhat’s in the manual? Important Safety InstructionsGetting Started Installing Your PhoneParts of the Base Getting to Know Your PhoneXx During a call switch to a waiting call Xx In standby increase the ringer volumeXx When entering text move the cursor to the right Xx In standby decrease the ringer volumeParts of the Handset Handset Only Icons Reading the DisplayOn the Base IconMenu Option What it does Using the MenusBasic Menu Operation Menu FunctionsFrom Base From Handset Speakerphone Earpiece Using Your PhoneRegister Accy. Menu Base Only Entering Text on Your PhoneUsing the Caller ID and Redial Lists Changing the VolumeUsing Call Waiting Using the PhonebookAdding Phonebook Entries Phone exits silent mode Using Special FeaturesSilent Mode Multistation FeaturesFrom the base From a cordless handset Privacy ModeCall Transfer IntercomVoice Message Notification Setting Up Chain DialingUsing Chain Dialing Chain DialingUsing the Answering System Answering System Options Ans. SetupRecording the Outgoing Message From the base From a handset Accessing the Answering SystemGetting Your Messages Follow these steps from the base or a handsetUsing the System While Youre Away from Home Screening Your CallsProgramming a Security Code Standby Solving ProblemsImportant Information System hangs up and returns toAnswering system problems Possible solutions Multistation problems Possible solutionsLiquid Damage Installing a Line Filter or DSL FilterResetting Stations Charge the battery completely, then try againFCC Part 68 Information Adapter and Battery Infor- mationRechargeable Battery Warning Battery pack with normal useFCC Part 15 Information FCC RF Exposure Information Industry Canada I.C. NoticeStar is a U.S. registered mark
Top Page Image Contents