Uniden D1685 Important Information, Solving Problems, System hangs up and returns to, Standby

2. During the greeting or beeps, press 0 and immediately enter your security

code. If you enter it incorrectly 3 times, the system hangs up and returns to
standby.
3. The system announces the time, number of	01	Repeat message
	02	Play message
messages in memory, and a help prompt. It
beeps to indicate it's waiting for a command.	03	Skip message
4. When you hear beeping, enter a 2-digit	04	Delete message
command from the chart. Enter both digits
	05	Stop playback
within 2 seconds or the entry times out.
	06	Turn the system on
##If you don't press any keys for 15 seconds,
	09	Turn the system off
the system hangs up and returns to
standby.	10	Hear help prompts

Important Information

Solving Problems

If you have any trouble with your phone, check this section first. If you need help, call our Customer Care Line listed on the front cover.

General problems	Possible solutions
No stations can make or	xx Check the telephone cord connection.
	xx Disconnect the base AC adapter for a few
receive calls.
	minutes; then reconnect it.
A handset can’t make or	xx Move the handset closer to the base.
receive calls.
A station can make calls,	xx Make sure the ringer is turned on.
but it won’t ring.	xx Make sure Silent Mode is turned off (see page 12).
A handset is not working.	xx Charge the battery for 15-20 hours.
	xx Check the battery connection.
The phone keeps ringing	xx You may have to change the line mode. Contact
when I answer on an
	Customer Service for instructions.
extension.

Audio issues	Possible solutions
Callers sound	xx Move the handset closer to the base or Range Extender.
	xx Keep the handset’s battery fully charged.
weak or soft.
	xx Increase the earpiece volume.

English - 18