Insert end caps, Mount the antenna to a mast

Step 10: Insert end caps

Fig. 11

Insert two of the plastic end caps in the ends of the antenna as shown in ﬁ gure 11.

Insert a third plastic end cap in the exposed end of the boom brace.

Insert the last two end caps on the ends of the reﬂ ector booms.

Use a rubber mallet to gently tap them into the ends so that they are secure.

Step 11: Mount the antenna to a mast

#10 Nuts

Boom brace

Clamp insert

Main

boom

Clamp

insert

Fig. 12

Fig. 13

Find the two U-bolts, four 1/4” ﬂ ange nuts, and the two mast clamp inserts.

Place the mast clamp inserts on the inside of the mast clamps on the antennas as shown in ﬁ gure

12.Then insert the U-bolts into the mast clamps and mast clamp inserts. Attach the nuts loosely.

Slide the antenna over the mast and lightly tighten the two mast clamps. (See ﬁ gures 12 and 13.) The top side of the antenna is the side with the black plastic pieces on it.