Step 12: Connect the coax downlead to your TV or preamplifier
English
Fig. 14
Point toward
broadcast
towers
Connect the coax downlead to your TV.
Rotate the antenna until you receive the best picture. You will probably need a helper to view the TV set while you are rotating the antenna.
NOTE: Point the small end of the antenna towards the station(s).
Important: Point The Antenna Toward Your Local Broadcast Towers
Visit www.antennaweb.org to see the locations of your local broadcast towers. This information is crucial in pointing your antenna correctly.
Step 13: Secure mast clamps and downlead, ground the antenna
Tighten the two mast clamps securely.
Secure the coaxial downlead to the mast (using cable ties or electrical tape) to prevent it from whipping by the wind.
Ground the antenna and mast per the accompanying grounding instructions.
Antenna Removal
Removal of the antenna should be exactly the reverse of the installation instructions. Please, for your own safety, follow the instructions for installing the antenna starting with the last step fi rst.
7