5.3 Storing a number
DIRECTORY/POSITION
■ Using this menu, display a |
screen with MEM001 (first |
It is advisable to store numbers in
16
5.4 Deleting a number
To cancel the content of a directory address, erase the name and the call number at that address, then press Ok.
position of SIM card). |
Press ✱ to access the first |
available location in the directory. |
■ Press Ok, then enter the name to |
be stored (the number of |
characters accepted depends on |
the SIM card). |
■ Press Ok, then enter the phone |
number to be stored preceded by |
the area code if necessary (up to |
20 characters). Validate by |
pressing Ok. |
You can introduce pauses in the number (indicated by comas “,”) by holding down ✱ or # (including on the standby screen). The numbers dialled after a pause are used in DTMF sequences (which can be used after a call number).
their international format (+, country code, and number).
Pressing on the ✱ key launches a search for the first available location.
5.5 Making a call to a stored number
■Enter the memory number in which you stored the required phone book references, then press # (quick call).
or
■Type in the first letter(s) of the required name stored in the
phone book, then press 
, or
■Enter the memory number in which you stored the required
references in the phone book then press ✱; then you can modify or complete the phone number (the prefix can be a phone extension, for example).
Press 
to initiate the call.
Modification of a stored number
When the number is displayed, press ✱, you can then modify or add to the number (prefix to add for an extension number for example).