Mitsubishi Electronics 110 manual Action when receiving a second call

Action when receiving a second call

You hear a 'double beep' when your phone receives a second call. An an- imated phone icon and the tele- phone number (if available) also appear.

To accept the second call

Press . This answers the second call and puts the first call on hold.

To reject the second call:

Press Reject . This returns a busy signal to the second caller.

To swap between the two connect- ed calls:

Press .

Multi-party or conference calls (net- work dependent)

Use this feature to make or receive between 2 to 5 calls at the same time with all parties being able to hear and talk with each other.

1Make and establish a call in the normal way and press .

2Enter another number into

the display and press . The first call is put on hold when the second call becomes active.

3Press Options for the fol- lowing menu:

Option	Description
Auto	to enter a DTMF string
DTMF	to the active call only
Swap	Swaps between active
	and call on hold
	Joins active and call on
Join	hold to make a multi-
	party or conference call
Mute/	Turns on or off the mi-
Unmute	crophone
End held	Ends the call on hold
End ac-	Ends the active call and
	connects with the call
tive
	on hold
End all	Ends all the calls
	Allows you to select
	and have a private con-

*Private versation with one of

with the conference callers while putting all the other calls on hold

Hold/Re- Holds or retrieves the trieve conference call

Allows you to select

*End one and end one of the conference call partici-

pants

*These items in the Options menu appear if more than 2 calls are joined in the conference call.

Throughout the conference call the display shows the actions you se- lected from the options menu.

For alternate line service (ALS), you cannot make subscribers conference calls between Line 1 and Line 2.

Using your phone

19