Kyocera KX9e manual Network settings, Data Settings

–Limit Outgoing calls only. Incoming calls can still be received and answered.

–Limit All limits both incoming and outgoing calls.

Erasing all contacts

You can erase all entries in your Contacts directory.

1.Select Menu → Settings → Security.

2.Enter your four-digit lock code.

3.Select Erase Contacts.

4.Select Yes to erase all contacts. A message appears: “Erase ALL Contacts?”

5.Select Yes again to erase all contacts.

Network settings

Switching between phone lines

Your phone can have two service accounts, or phone lines, associated with it. Each phone line has its own phone number.

When you are using one line, you cannot receive calls from the other. It would be as if the phone were “off” for that number. Your voicemail, however, will still take messages. All contacts and settings are shared for both lines.

Note: You must first establish a second phone line with your service provider. Once established, a second phone number becomes available in the menu for selection.

1.Select Menu → Settings → Network → Set Phone Line.

2.Select one of the two lines and press .

Data Settings

Setting Com port speed

The Com Speed sets the data rate at which your phone connects to a laptop or personal computer or at which it sends and receives over-the-air text messages.

1.Select Menu → Settings → Accessories → Com Port Speed.

2.Select the speed: 19.2 kbps, 115.2 kbps

(default), or 230.4 kbps.

Note: There may be a higher charge for making calls using high-speed data in areas where 1X service is available. Check with your service provider for details.

Setting the phone to receive data or faxes

Your phone may be able to receive certain data or faxes, depending on the system sending the information. You cannot receive voice calls while the phone is in data/fax mode. To receive data or faxes, you must connect the phone to a laptop or PC and switch the phone from voice mode to data/ fax mode.

Note: To purchase a data cable call

800-349-4188 (U.S.A. only), 858-882-1410, or visit www.kyocera-wireless.com/store.

1.Connect the phone to the laptop or PC.

2.Set the Com Port speed.

User Guide for the Kyocera KX9e Phone 35