Kyocera KX9e manual Setting position location, Connecting to a TTY/TDD device

3.Select Menu → Settings → Network → Data/Fax Calls.

4.Select an option and press :

–Voice only allows only voice calls.

–Fax, next call or Data, next call sets the phone to fax mode or data mode for the next incoming call or the next 10 minutes.

–Fax, until off or Data, until off forces the phone into fax or data mode until the phone is turned off.

Note: You cannot receive voice calls while the phone is in data/fax mode.

Connecting to a TTY/TDD device

You can connect the phone to a TTY device for the hearing impaired.

Note: Enable TTY only when using the phone with a TTY device.

1.Connect the TTY device to the phone.

2.Enter from your keypad.

3.Select the TTY option.

4.Press to clear the message.

5.Highlight an option and press .

Note: TTY/TDD service may not be available. Check with your service provider for more information.

Setting position location

This setting allows you to share your location information with network services other than

emergency services (911, 111, 999, 000, etc.) in markets where service has been implemented.

Note: This feature works only when your phone is in digital mode. You do not have the option of turning off the locator to emergency services.

1.Select Menu → Settings → Network → Location.

2.Select 911 Only or Location On.

–911 Only (default) shares your position information only with emergency services when you call your 3-digit emergency code (911, 000, 111, etc.).

–Location On shares your position information with your service provider’s network in addition to emergency services.

36 Setting position location