Kyocera KX9e manual Waking up the phone, Answering the phone, Answering automatically

Waking up the phone

If your phone is connected to a portable hands- free car kit, you can use a voice command to activate the phone to make a call.

Note: Voice Wake-up does not work with Keygaurd active. To disable Keygaurd, see “Locking your phone” on page 34.

To activate the Voice Wake-up setting:

•Select Menu → Settings →

Voice Features → Voice Wake-Up → With accessory.

To wake up the phone:

1.Say Wake Up and listen for a tone.

2.Say Wake Up again until you hear two tones.

If the phone does not recognize your “Wake up” command, see “Training voice recognition” on page 40.

Answering the phone

You can set the portable hands-free car kit to either (1) answer automatically or (2) answer using a voice command.

Answering automatically

•Select Menu → Settings → Accessories → Auto-Answer → After 5 seconds.

Note: This setting also works with the portable hands-free car kit.

Answering using voice commands

If Auto-Answer is turned off, you can use a voice command to answer an incoming call using the installed Kyocera hands-free car kit.

To turn off Auto-Answer:

•Select Menu → Settings → Accessories → Auto-Answer → Disabled.

To activate the Voice Answer setting:

1.Select Menu → Settings →

Voice Features → Voice Answer → Enabled.

2.Select Menu → Settings → Silent Mode → Normal Sounds.

To answer a call:

When you receive an incoming call, the phone responds: “Incoming call, answer?” or “Incoming roam call, answer?” If the caller is recognized as a saved contact entry, then the phone says “Incoming call from (Name), answer?”

•Say Yes or press any key except .

Ignoring an incoming call

To ignore an incoming call, do one of the following:

•Say No and press to silence the alert.

•Remain silent. The voice alert repeats twice and the phone rings once, then returns to the home screen.

User Guide for the Kyocera KX9e Phone 39