Controlling network roaming
Setting an alert for roaming
You may use this setting if you want the phone to alert you when you roam outside of your home service area.
1.Select Menu → Settings → Network → Roam/Svc Alert.
2.Select an option and press 
.
–When no svc alerts you with three tones decreasing in pitch when service is lost and three tones increasing in pitch when service is acquired again.
–Roam Change alerts you with two decreasing tones when roaming service is acquired and three increasing tones when home area service is acquired again.
–Any Change alerts you with three increasing tones if there is a change in roaming service or three decreasing tones if the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming call will be subject to roaming charges.
1.Select Menu → Settings → Sounds → Roam Ringer.
2.Highlight Enabled to hear the ringer.
3.Press 
to set.
Setting Call Guard to avoid roaming calls
You can set the phone to warn you before you answer or place a call while roaming.
•Select Menu → Settings → Convenience → Call Guard → Call prompt.
–The phone now emits a distinctive roam alert to indicate when you are roaming during calls.
–To accept or place a call while roaming,
you must press 
.
Note: This functionality is disabled when the phone is in emergency mode.
Turning roaming on or off
This setting allows you to control the phone’s roaming feature by specifying which signals the phone will accept.
1.Select Menu → Settings → Network → Roam Option.
2.Select an option and press 
.
–Automatic (recommended setting) accepts any system the phone service provides.
–No roaming prevents you from making or receiving calls outside of your home service area.
Note: If your phone has more than one setting for Automatic, contact your service provider to determine which one to use.
User Guide for the Kyocera Prisma Phone | 11 |