Kyocera KX160A Timing your calls, Receiving data or faxes, Setting roaming alerts and ringers

Timing your calls

You can set your phone to beep 10 seconds before each minute passes when you are on a call.

•Select Menu → Settings → Sounds → Minute Alert → Enabled.

Receiving data or faxes

Your phone may be able to receive certain data or faxes, depending on the system sending the information. For more information, see page 41.

Setting roaming alerts and ringers

Setting an alert for roaming

You may use this setting if you want the phone

to alert you when you roam outside of your home service area.

1.Select Menu → Settings → Network → Roam/Svc Alert.

2.Select an option and press .

–When no svc alerts you with three tones decreasing in pitch when service is lost and three tones increasing in pitch when service is acquired again.

–On roam change alerts you with two decreasing tones when roaming service is acquired and three increasing tones when home area service is acquired again.

–On any change alerts you with three increasing tones if there is a change in roaming service or three decreasing tones if the phone loses service.

Setting the roam ringer

You can set a ringer to indicate when an incoming call is subject to roaming charges.

1.Select Menu → Settings → Sounds → Roam Ringer.

2.Highlight Enabled to hear the ringer.

3.Press to set.

Setting Call Guard to avoid roming calls

You can set the phone to warn you before you answer or place a call while roaming.

•Select Menu → Settings → Convenience → Call Guard → Call prompt.

–The phone now emits a distinctive roam ring to indicate when you are roaming during calls.

–To accept or place a call while roaming, you must press .

Note: This functionality is disabled when the phone is in emergency mode.

User Guide for the Kyocera Xcursion Phone 13