Kyocera KX160A Data Settings, Setting Com port speed, Setting the phone to receive data or faxes

1.Select Menu → Settings → Network → Set Phone Line.

2.Select one of the two lines and press .

Data Settings

Setting Com port speed

The Com Speed sets the data rate at which your phone connects to a laptop or PC.

1.Select Menu → Settings → Accessories → Com Port Speed.

2.Select the speed. The options are: 19.2 kbps,

115.2 kbps (default), 230.4 kbps and Other.

Note: There may be a higher charge for making calls using high-speed data in areas where 1X service is available. Check with your service provider for details.

Setting the phone to receive data or faxes

Your phone may be able to receive certain data or faxes, depending on the system sending the information. You cannot receive voice calls while the phone is in data/fax mode. To receive data or faxes, you must connect the phone to a laptop or PC and switch the phone from voice mode

to data/fax mode.

Note: To purchase a cable call (800) 349-4188 (U.S.A. only), (858) 882-1410, or visit www.kyocera-wireless.com/store.

1.Connect the phone to the laptop or PC.

2.Set the Com speed.

3.Select Menu → Settings → Network → Data/Fax Calls.

4.Press to select an option:

–Voice only—Allow only voice calls.

–Fax, next call or Data, next call—Set the phone to fax mode or data mode for the next incoming call or the next 10 minutes.

–Fax, until off or Data, until off—Forces the phone into data mode until the phone is turned off.

Note: You cannot receive voice calls while the phone is in data/fax mode.

Connecting to a TTY/TDD device

You can connect the phone to a TTY device for the hearing impaired. Note: Enable TTY only when using the phone with a TTY device.

1.Connect the TTY device to the phone.

2.Enter from your keypad.

3.Press to select the TTY option.

4.Press to clear the message.

5.Press down to highlight TTY On.

6.Press .

User Guide for the Kyocera Xcursion Phone 41