Kyocera E1000 manual Volume control, Hold call, Speed dialing, Touch dialing, Voicemail

3CALL FEATURES

This chapter describes call features such as volume, holding calls, speed dialing, and other features.

Volume control

There are several ways to control the volume of your phone.

Adjust volume during a call

To adjust the earpiece volume during a call, press the Volume key up or down.

Use the speakerphone

Your phone has a built-in speakerphone. To turn on the speakerphone, press the Speakerphone key. The speakerphone icon appears on the home screen when the speakerphone is on. To turn off the speakerphone, press the Speakerphone key again.

Note: If you press the Speakerphone key during an incoming call, you will answer the call.

Silence an incoming call

To silence the phone without answering the call press the End key or select Silence.

To silence the phone and answer the call, press the End key and then press the Send key.

Note: In the absence of voicemail, this feature drops the call.

Hold call

The Hold Call feature allows you to place incoming calls on hold until you are ready to answer them. See “Hold calls” on page 45.

Speed dialing

The Speed Dial feature allows you to assign a one- or two-digit shortcut to a contact. Before you can use speed dialing, you must save a phone number as a contact and assign a speed dial location to it. See “Customize a number” on page 19.

To call a contact that has a speed dial location.

1.Enter the one- or two-digit speed dial location.

2.Press the Send key.

1-Touch dialing

The 1-Touch Dialing feature is the fastest way to speed dial a contact that has a speed dial location. See “1-Touch dialing” on page 46.

Voicemail

Configure your voicemail

Before your phone can receive voicemail messages, you must set up a password and record a personal greeting with your service provider.

10 Volume control