Kyocera E1000 manual Voice dial list, Voice commands, Voice Commands

With voice features, you can call a contact, dial a phone number, access menus, or find contact information from your voice dial list using voice recognition.

Note: You cannot use voice recognition to end a call; you must press the End key when the flip is open.

Voice dial list

To call or find a contact using voice dial you must add the contact to your voice dial list. The contact name must not have more than three words or components in a contact name for voice dialing recognition.

Add a voice tag

You can add a voice dial tag to your phone. See “Add voice dial” on page 46.

Edit a voice tag

To edit existing voice dial tags:

1.Select Menu > Contacts > Voice Dial List.

2.Select your desired contact.

3.Highlight the number with a voice tag and select Options > Add Voice Dial,

Edit Voice Dial, or Erase Voice Dial.

4.Follow the prompts.

Voice commands

With voice commands, you speak your commands into the phone’s microphone.

Start voice commands

1.Press the Call key to initiate voice commands. The phone prompts, “Say a name or say dial”.

2.Say one of the following commands and follow the voice prompts.

–“Say a name” a call a contact on your voice dial list.

–“Dial” to speak the digits of the phone number.

3.Press the Call key again to exit and go to the Recent calls list.

Call a contact

Before calling a person, you need to add the contact name to the Voice Dial List. See “Add voice dial” on page 46.

1.From the home screen, press the Call key. The phone prompts, “Say a name”.

2.Say the name of the person you want to call.

If the name you said matches a contact in the Voice Dial List, the phone responds: “Calling (Name).” Remain silent to make the call, or say “No” to cancel.