Kyocera E1000 manual Silent mode, Volume, Flip sounds, Power on/off sound

Roam ringer

Your phone can alert you to roaming calls with a specific ringer. Select Menu > Settings > Sounds > Ringers > Roam Ringer > Enabled.

Silent mode

Your phone is set to make sounds when you receive calls, press keys, navigate through menus, and receive alerts (such as new messages). You can silence all sounds and set the phone to vibrate or light up when you receive calls and alerts.

Select Menu > Settings > Silent Mode and one of the following:

•Normal Sounds rings for the incoming call or alert (in effect, returns phone to a non-silent mode).

•Vibrate Only vibrates for the duration of the incoming call or other alerts.

•Vibe then Ring vibrates for the first 10 seconds and then rings for the remainder of the incoming call alert.

•Lights Only lights up for the duration of the

incoming call or other alerts.

You can also press and hold the Space # key to go back forth from Vibrate Only mode to Normal Sounds mode.

Note: The phone will ring when it is attached to an external power source (such as a charger), even if all sounds have been silenced.

Volume

Control the volume of your phone’s features.

Volume controls

Control the volume of the phone’s ringer, speakerphone, earpiece, and keypad.

1.Select Menu > Settings > Sounds > Volume > Ringer Volume, Speaker Volume, Earpiece Volume, or Key Volume.

2.Scroll right to increase the volume or left to decrease the volume.

3.Press the OK key to save

Smart volume

To automatically adjust the volume during a call, based on surrounding noise levels,

Select Menu > Settings > Sounds > Volume > Smart Volume > Enabled.

Flip sounds

Assign specific sounds for when your phone’s flip opens or closes.

1.Select Menu > Settings > Sounds > Flip Sounds > Flip Open or Flip Closed.

2.Select a sound. As you scroll down the list you will hear the sounds.

Power on/off sound

Your phone plays a sound when it is powering on and off. Select Menu > Settings > Sounds > Pwr On/Off > Enabled.