For Your Safety, General Safety, FCC Regulations

For Your Safety

General Safety

Don’t make or receive handheld calls while driving. Never text while driving.

Keep your phone at least 0.6 inches (15mm) away from your ear or body while making calls.

Small parts may cause choking.

Your phone can produce a loud sound.

Avoid contact with anything magnetic.

Keep away from pacemakers and other electronic medical devices.

Switch off when asked to in hospitals and medical facilities.

Switch off when told to in aircrafts and airports.

Switch off when near explosive materials or liquids.

Don’t use at gas stations.

Your phone may produce a bright or flashing light.

Don’t dispose of your phone in fire.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Avoid extreme temperatures.

Avoid contact with liquids. Keep your phone dry.

Don’t take your phone apart.

Only use approved accessories.

Don’t rely on your phone for emergency communications.

Radio Frequency (RF) Energy

This model phone meets the government’s requirements for exposure to radio waves.

This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States, Industry Canada of Canada.

During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to

a wireless base station antenna, the lower the power output.

The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg, and 1.6W/kg by Industry Canada.

This device is compliance with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C, and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure guidelines when tested with the device directly contacted to the body.

The FCC has granted an Equipment Authorization for

this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: Q78-Z795G.

For this device, the highest reported SAR value for usage against the head is 0.60 W/kg, for usage near the body is 1.34 W/kg.

While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.

SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10

mmaway from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and the your body.

RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and use such

FCC Regulations

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.