Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty.

UPS Location Warnings

•Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight.

•For best performance, keep the indoor temperature between between 32º F and 104º F (0º C and 40º C).

•Leave adequate space around all sides of the UPS for proper ventilation.

UPS Connection Warnings

•Connect your UPS directly to a properly grounded AC power outlet. Do not plug the UPS into itself; this will damage the UPS.

•Do not modify the UPS's plug, and do not use an adapter that would eliminate the UPS’s ground connection.

•Do not use extension cords to connect the UPS to an AC outlet. Your warranty will be voided if anything other than Tripp Lite surge suppressors are used to connect your UPS to an outlet.

•If the UPS receives power from a motor-powered AC generator, the generator must provide clean, filtered, computer-grade output.

Equipment Connection Warnings

•Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.

•Do not connect surge suppressors or extension cords to the output of your UPS. This might damage the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

•Your UPS does not require routine maintenance. Do not open your UPS for any reason except battery replacement. There are no user-serviceable parts inside.

•Battery replacement must be performed by qualified service personnel. Because the batteries present a risk of electrical shock and burn from high short-circuit current, observe proper precautions. Unplug and turn off the UPS before performing battery replacement. Use tools with insulated handles, and replace the existing batteries with the same number and type of new batteries (Sealed Lead-Acid). Do not open the batteries. Do not short or bridge the battery terminals with any object.

•The UPS batteries are recyclable. Refer to local codes for disposal requirements, or in the USA only call 1-800-SAV-LEAD for recycling information. Do not dispose of the batteries in a fire.

•Only connect Tripp Lite battery packs of the appropriate type and correct voltage to the external battery connector.

•Do not connect or disconnect external batteries while the UPS is operating from battery.

•Do not operate your UPS without batteries.

2

Page 1 Page 3
Page 2
Image 2
Tripp Lite SUINT1000RTXL2U, SU1000RTXL2UHV owner manual Important Safety Instructions
Page 1 Page 3

SU1000RTXL2UHV, SUINT1000RTXL2U, SU1000RTXL2U specifications

The Tripp Lite SU1000RTXL2U, SUINT1000RTXL2U, and SU1000RTXL2UHV are advanced uninterruptible power supply (UPS) solutions designed to provide reliable power management for critical electronic equipment. Ideal for data centers, telecommunication systems, and sensitive electronics in both home and office settings, these UPS units are engineered to ensure continuous power supply during outages and fluctuations.

One of the standout features of the Tripp Lite SU1000RTXL2U is its high capacity, offering 1000VA/900W of power, which accommodates a wide range of devices. It employs advanced line-interactive technology that extends battery life and maximizes backup performance. With a pure sine wave output, users can rest assured that their equipment receives clean power, reducing wear and tear on electronics.

The SUINT1000RTXL2U is specifically designed for environments that require seamless integration with networking and IT systems. It provides a broad input voltage range, which helps protect against utility power fluctuations. This model is notably equipped with Advanced SmartBoost technology, enhancing power performance by allowing the UPS to compensate for voltage sags and surges.

For users needing enhanced runtime, the SU1000RTXL2UHV variant stands out with support for external battery packs. This extendable architecture allows businesses to scale their backup times according to operational needs, ensuring uninterrupted service during extended outages. Furthermore, its hot-swappable batteries facilitate easy maintenance without interrupting power to connected devices.

These models feature multiple outlets, ensuring that users have ample connectivity for their devices. The included LCD display provides real-time information about battery status, load levels, and key operating parameters, ensuring that users can monitor their power environment effectively.

In addition to their robust features, these units are designed with compact and rack-mountable configurations in mind, making them suitable for a variety of setups, including server rooms and workstations where space is at a premium.

Tripp Lite’s commitment to quality is evident, as all these UPS models meet stringent safety and performance standards, adding an extra layer of assurance for users relying on these systems to maintain critical operations. Whether for home office setups or corporate infrastructure, the SU1000RTXL2U, SUINT1000RTXL2U, and SU1000RTXL2UHV deliver exceptional performance for all power management needs.
Top Page Image Contents