Connection and Start-Up
Plug your UPS’s line cord into anelectrical outlet.If your model features a detachable line cord,
first plug the female end into your UPS’s AC
Input Receptacle.
Your UPS must be connected to a dedicated
circuit of sufficient amperage—check the
“Recommended Utility Amps” rating of your
model in the specifications. Note, however,that
the select models may be fitted with different
plug types. Refer to the “OP Rating/Plug
Rating”chart printed on the top of your UPS.
Once your UPS is plugged in, the fan and all
Indicator Lights will turn ON. The “LINE”and
“LOAD ACTIVE METER”LEDs will illuminate
and the UPS will emit a beep to indicate normal
operation. However,power is not supplied to
your UPS’s AC outlets until the UPS is turned on.
Plug your equipment into your UPS.Your UPS is designed to support computer
equipment only. You will overload your UPS if
you connect household appliances or laser
printers to the UPS's outlets.
Turn your UPS ON:• Press the “ON/TEST” Switch
• Hold it for several seconds until you
hear a beep
• Release it
Your UPS will begin providing AC power to its outlets.
The “ON LINE”LED will illuminate.
SU2200RTXL2U Plug
(NEMA 5-20)shown
1
1
2
3
2
3
SU2200RTXL2U shown
4
Installation
(continued)
200208159 93-2091 SU Owner’s Manual.qxd 10/4/2002 3:26 PM Page 4