Troubleshooting
(continued)
Lights (On/Flashing) and Condition Solution
On:FAULT,BYPASS, LINE, 100%, 75% Check the UPS to be sure that there is
Condition:On Bypass due to High adequate space for air to circulate near
Internal Temperature the vents and that the fan is working
properly.Restart the UPS.
Flashing:LINE This indicates that utility power is too high
Condition:Input Abnormal or low for the UPS to operate in BYPASS
mode, so if an inverter failure occurs,
the UPS will deliver no output.
On:FAULT,100% Restart the UPS.If the problem persists,
Flashing:LINE, BYPASS contact Tripp Lite for repairs.
Condition:No Output due to High
Output Voltage and Abnormal Input
Flashing:LINE, BYPASS
Restart the UPS.If the problem persists,
On: FAULT, 7 5% contact Tripp Lite for repairs.
Condition:No Output due to Low
Output Voltage and Abnormal Input
Flashing:LINE, BYPASS Restart the UPS.If the problem persists,
On: FAULT, 5 0% contact Tripp Lite for repairs.
Condition:No Output due to High
Bus Voltage and Abnormal Input
Flashing:LINE, BYPASS Restart the UPS.If the problem persists,
On: FAULT, 2 5% contact Tripp Lite for repairs.
Condition:No Output due to Low
Bus Voltage and Abnormal Input
Flashing:LINE, BYPASS Check the UPS to be sure that there is
On:FAULT,100%, 75% adequate space for air to circulate near
Condition:No Output due to High the vents and that the fan is working
Internal Temperature and Abnormal properly.Restart the UPS. If the problem
Input persists, contact Tripp Lite for repairs.
11
200208159 93-2091 SU Owner’s Manual.qxd 10/4/2002 3:26 PM Page 11