B&B Electronics 485DSS manual Running Demonstration Program

Running Demonstration Program

Before you can run the demonstration program, you must run the install program described in the “Hard Drive Installation” section above. Make sure you have made the proper connections from the 485DSS to the RS-485 communication lines.

If you are running Windows, exit Windows to DOS.

To run the program follow these steps from the DOS prompt:

QuickBasic Program

1.Type CD \485DSS and press the <Enter> key.

2.Type DSS_DEMO and press the <Enter> key.

C Demo Program

1.Type CD\485DSS\C and press the <Enter> key.

2.Type DSS_DEMO and press the <Enter> key.

Pascal Demo Program

1.Type CD\485DSS\PASCAL and press the <Enter> key.

2.Type DSS_DEMO and press the <Enter> key.

485DSS3298 Manual 17

B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350

PH (815) 433-5100 -- FAX (815) 434-7094