Lumex Syatems US0208 user manual LX5088 No-Gap Bed Rail, GF6580A-1 Low Universal Half Rail

LX5088: No-Gap Bed Rail

LX5088

No Gap Side Rail

HEADBOARD
B	G2	Spring Buttons	G3

FOOTBOARD

B

Position spring-loaded crossbraces #B into slots G2 and G3 on both sides of bed with spring but- tons facing inward as shown above.

GF6580A-1: Low Universal Half Rail

	Cable tie
	A
	B
Secure crossbrace	HEADBOARD
GF6580A-1
Low Universal Half Rail
to head deck angle
with cable tie

SUGGESTED	Spring Buttons G2
RAIL TO HEADBOARD
MINIMUM OF 9.25"

Follow same	FOOTBOARD
procedure
for mounting
half rails on
foot-end using
G3 slots.
G3

Head end: Position spring-loaded crossbrace #B into slots G2 on both sides of bed. Position cross- brace #A so that the stabilizer rests underneath the head deck angle. Secure the crossbrace to the head deck angle with a cable tie. Ensure spring buttons face inward as shown above.

Note: Suggested rail-to-headboard minimum is 9.25 inches.

Foot end: Position spring-loaded crossbrace #B into slots G3 on both sides of bed. Position cross- brace #A so that the stabilizer rests underneath the foot deck angle. Secure the crossbrace to the foot deck angle with a cable tie. Ensure spring buttons face inward as shown at head end above.

US0208-INS-LAB-RevB09 • Patriot™ Homecare Bed 17