Lumex Syatems US0208 user manual All models Assemble head bed end

Page 9

7.After bed ends have been attached, install bed end safety pins to act as safety latches.

(Bed End Safety Pin Kit part number: 690-1000-100; includes four clevis pins, four hitch pins and four washers). A lan- yard is supplied to attach hardware to the bed or the end upon disassembly.

Insert pins and washer as shown at right, with flat washer on outside of bed end hook. Bed end safety pins, while not necessary for normal bed operation, will prevent the bed ends from accidentally rolling off when moving or pushing the bed, or while installing or using bed-mount trapezes.

washer

bed end hook

Install bed end safety pins

Full-electric bed only (US0458/US0458PL): Align motor and gearbox

After installing foot end, you may have to shift bed frame slightly in bed end hooks to ensure proper horizontal alignment with motor coupling and end gearbox shaft.

When coupling and shaft are aligned, unlock spring-loaded coupling. Coupling may not snap into groove until motor is rotated with pendant hand control after bed is assembled.

HEAD

FOOT

Route cord under cross-angle

Plug hi/lo motor into Okimat actuator assembly, being careful to route cord under the fixed base frame cross-angle as shown above to ensure clearance with hi/lo drive shaft. The motor plug is located next to the pendant hand control plug on the actuator.

All models: Assemble head bed end

8. Repeat steps 1-7 for head bed end.

US0208-INS-LAB-RevB09 • Patriot™ Homecare Bed

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents US0208-INS-LAB-RevB09 Contents Safety Thermal Motor Protection GRAVITY-DOWN Feature for Head and Knee ElevationHead and Foot Assembly Assembly InstructionsMotor Assembly Install MotorsRemove motor slide caps Motor assembly troubleshooting Install motor slide capsFULL-ELECTRIC BED only US0458/US0458PL Caster Position Standard conventional bed heightAll bed models Assemble bed ends BED END AssemblyAll models Assemble head bed end HI/LO ROD Assembly / BED Length Semi-electric bed only US0208/US0208PL Assemble hi/lo rodFull-electric bed only US0458/US0458PL Assemble hi/lo rod Foot END All models Attach HI/LO rod to gearbox or motor shaft pinsPendant Hand Control Operation BED OperationFull-electric bed only US0458/US0458PL Semi-electric bed onlyCrank Operation SEMI-ELECTRIC BED only US0208/US0208PL SPECIFICATIONS, ALL Models BED Rail Safety Accessories BED RailsLumex Patriot Liberty BED Rails GF6500B-1 Assist BarGF6590B-1 Half No-Gap Head Rail Lumex Standard BED RailsGF6570B-1 Full Length Rail GF6570A-1 Full Length Side RailGF6580A-1 Low Universal Half Rail LX5088 No-Gap Bed RailService PARTS, ALL Models BED ComponentsPart number Description Semi-electric Full-electric BED END Components Part number Description BED Service PartsMaintenance and Safety Checks Warranty Index A. Corporate Headquarters GF Health Products, Inc
Top Page Image Contents