Citizen JQ7XXX Setting Analog Time Display, Using Digital Function Setting Digital Time Display

3.Setting Analog Time Display

1) Pull out crown and second hand stops.

2) Turn crown and set hands to the correct time.

3) Push crown back in to restart the watch.

Analog Time Setting Position

5. Using Digital Function

ASetting Digital Time Display

• EL Light is illuminated when ◯A button is pressed in normal Time display mode.

To set for Summertime

To set the watch to the correct time:

Stop seconds hand at “0”. Move minutes hand a few minutes ahead of the time you want to set, then move it back to the correct time and push crown back synchronizing with the time tone or time casting.

*Analog and digital displays can be set to different times to use as a dual time watch.

4.Mode Selection Cal. C440

In addition to Time display, Cal. C440 has 6 functions of Calendar, Alarm-1, Alarm-2, Chronograph, Race Timer and Timer. Mode of watch changes each time ◯M button is pressed. See Mode Indicator to check the present mode.

Auto-Return:

Display will return automatically to normal Time display mode if left in Alarm-1 or Alarm-2 mode for more than 2 minutes without any operation.

Cal. C450

In addition to the Time display, Cal. C450 has 4 functions of Calendar, Alarm-1, Chronograph and Timer. Mode of watch changes each time ◯M button is pressed.

See Mode Indicator to check the present mode.

Auto-Return:

Display will return automatically to normal Time display mode if left in Alarm mode for more than 2 minutes without any operation.

1)Press ◯B button for more than 2 seconds in normal Time display mode. “Summer, ON/OF” flashes.

2)Press ◯A button to set for

summertime. Indicator changes to On or Off each time this button is pressed.

•“SUMMER” is on display when set to summertime. The watch shows the time one hour earlier than the regular time when it is set to summertime.

To adjust Seconds

1)Press ◯B button in adjustment mode (“SUMMER” is flashing). Seconds flash.

2)Press ◯A button while Seconds are flashing. Digits return to “00,” and restart.

To adjust Time display

1)Press ◯B button in adjustment mode (Seconds are flashing). Flashing digits change in order as shown in diagram each time button is pressed.

2)Press ◯A button to adjust flashing digits. Press and hold ◯A button for rapid advancement.

Button Operation:

◯B Press for 2 seconds or longer. ◯B Press once.

•Summertime On/Off is changed each time ◯A button is pressed.

•12/24-hour display is changed each time ◯A button is pressed.

•Be sure to set AM/PM mark correctly when using 12-hour display system.

•Auto-Return to normal Time display will activate when the watch is left in adjustment mode for more than 2 minutes.

•If ◯M button is pressed in adjustment mode, display will return directly to normal Time.

Linkage with Summertime:

Setting of Alarms 1 & 2 (Cal. C440) or Alarm (Cal. C450) does not change when Summertime is set in Time display Mode.