Citizen JQ7XXX Setting Calendar, To set Calendar, Alarm Sound, Instant Manual Return

B Setting Calendar

•Calendar shows Month, Date and Day.

•EL Light is illuminated while ◯A button is pressed and held in Calendar display mode.

To set Calendar

1)Press ◯B button in Calendar mode for more than 2 seconds. Month flashes.

2)Flashing digits change in order as shown in the diagram each time ◯B button is pressed.

3)Press ◯A button to adjust flashing digits. Press and hold ◯A button for rapid advancement.

•Year can be set from 1996 to 2099.

•Auto-Return to normal Calendar display will activate when the watch is left in adjustment mode for more than 2 minutes.

•Day of the week is automatically set with adjustment of Month, Date and Year.

•When calendar is set to non-existent date (e.g., February 30) display will show automatically first day of next month when returned to normal mode.

•Month-end adjustments are not necessary as Calendar is programmed to be set automatically. If ◯M button is pressed in adjustment mode, display will return directly to normal Calendar display mode.

CSetting Alarm-1 (Cal. C440)/Alarm (Cal. C450)

To set Alarm-1 (Cal. C440)/Alarm (Cal.450)

1) Press ◯B button in alarm mode for more than

2 seconds. Hours flash.

2) Press ◯B button as necessary to select digits to be adjusted. Press ◯A button to set Alarm.

• If Time display is set to 12-hour display system, it is linked to Alarm. Make sure that AM/PM is set correctly.

• Alarm setting does not change when Summertime is set in Time display mode.

Alarm Sound

•Alarm buzzer will sound for about 20 seconds. Press any button to stop Alarm sound.

•Alarm Monitor

•Alarm will sound while ◯A button is pressed in

Alarm mode

Auto-Return

•Display will return automatically to normal Alarm display mode if left in Alarm adjustment mode for more than 2 minutes without any operation.

•Display will return automatically to Time display

mode when 2 minutes have elapsed in normal Alarm display mode.

Instant Manual Return

•Press ◯M button in Alarm adjustment mode to return instantly to normal Alarm display.

D Setting Alarm-2 (Cal. C440)

•Alarm-2 can be set and operated in the same way as Alarm-1. Alarm-2 has a different sound.

E Using Chronograph

Chronograph measures up to 23 hours 59 minutes 59 seconds in 1/100 second. It will stop at next second when it reaches exactly 24 hours and reset to 00 minute 00 second 00. Chronograph also has a split time measurement function.

Minutes

(Change to Hours after 60 min.)

[Display of Time Measurement]

•Chronograph shows minutes, Seconds and 1/100 Second up to 60 minutes and will change to Hours, Minutes and Seconds after 60 minutes.

To Measure Total Elapsed Time

1) Press ◯A button to start/stop Chronograph.

•Start/stop can be repeated for any number of times by pressing ◯A button.

•EL Light will turn ON for 4 seconds when

counting is stopped by pressing ◯A button.

2)Press ◯B button when counting is stopped to reset Chronograph.

To switch Alarm On/Off

•Press ◯A button in Alarm mode to switch alarm On/Off.