Vuzix iWear AV920 manual IWear AV920 Connectivity, IWear AV920 User Adjustable, Charging, Plugging

iWear® AV920 Connectivity

The iWear® AV920 has a single input mini-jack for line level stereo audio and either NTSC or PAL video. There is a second mini-jack for connecting your personal head phones in the event you prefer them over the included speakers. Finally, iWear® AV920 has a mini USB connection for charging the battery and updating the firmware in the device.

Charging

Plug the charging cable into the Battery Box and the AC adaptor.

LED indicator:

green - charge OK

red - charge low flash red - needs charging amber - charging

Plugging In

The following are a few examples of acceptable ways of plugging in your iWear® AV920. This will vary from system to system.

Note on Stereoscopic 3D

iWear® AV920 is capable of displaying stereoscopic 3D images in two different ways. If the content being viewed is enabled with iWear 3D control information, iWear® AV920 will automatically be set in the proper 3D mode. If you are viewing interlaced 3D content without the iWear 3D, 3D can be enabled via the OSD controls with either L/R or R/L modes.

iWear® AV920 User Adjustable

iWear® AV920 features many user adjustable design elements to ensure a comfortable experience. These allow you to customize iWear® AV920 for a perfect fit.

Speaker Adjust

Your iWear® AV920 includes flexible, removable speakers. These speakers are adjustable. Simply grasp the speaker and flex the stem into place for maximum comfort.

To remove the speakers, pull them out along the inside of the temple piece. Note that the speakers are not designed to fit in your ears.