Preparing Your Camera for Use

Battery Installation

Your camera requires one (1) AAA battery. Alkaline battery recommended. Insert the battery into the camera:

1.Open the battery cover at the bottom of the camera.

2.Insert the battery according to the polarity (+ and -) indicated on the inside of the battery compartment.

3.Close the battery cover.

WARNING: Opening the battery compartment and/or removing the battery will erase the photos currently stored in the camera. Download your photos and videos as often as possible so as not to lose them. Photos may also be lost when the batteries runs low.

The LCD will flash when your batteries are running low. This indicates that the battery should be replaced. Remember, before you open the battery compartment to change the battery, please download your photos you have on the camera. When the battery voltage drops, the LCD will display “Lo” and the camera will turn off automatically.

Note: If you do not intend to use your camera for an extended period, remove the battery to avoid leakage and corrosion.

- 7 -