8.Insert the wires into the Right Handrail (64) through the indicated hole as you set the con- sole assembly on the Left and Right Handrails (59, 64). Make sure that no wires are pinched.
Attach the console assembly with four #8 x 3/4" Screws (4). Start all four Screws, and then tighten them. Do not overtighten the Screws.
See assembly step 4. Firmly tighten the six 3/8" x 3 1/4" Screws (2) on the lower ends of the Left and Right Uprights (66, 76) (only one side is shown).
9.Attach the two Console Clamps (83) to the con- sole assembly with four #8 x 1" Screws (7).
8 | Console Assembly |
| |
|
| ||
64 |
|
|
|
|
| Ground |
|
| Wires | Wires | 59 |
| Hole |
|
|
4 |
|
| 4 |
| 76 |
| 66 |
|
|
| |
9 |
| Console |
|
|
| Assembly |
|
| 83 |
| 83 |
| 7 |
| 7 |
11