Weslo WLTL39312.0 user manual Age the Upright Wire, See the inset drawing. Tie the wire tie

2. Locate the Upright Wire (63) bundled between	2
the Base (74) and the Belly Pan (52). Route the
Upright Wire into the Base and out of the indi-
cated hole.
Press a Base Cap (70) into each side of the
Base (74).
See the inset drawing. Cut the plastic tie near
the Upright Wire (63). Be careful not to dam-
age the Upright Wire.		52	74
				Tie
		63	70	Cut
			Hole	63
3. Identify the Right Upright (76). Have a second	3
person hold the Right Upright near the Base (74).
See the inset drawing. Tie the wire tie in the				63
Right Upright (76) securely around the end of
the Upright Wire (63). Then, insert the Upright
Wire into the lower end of the Right Upright as
you pull the other end of the wire tie through the		63	76
Right Upright.	Wire
	Tie
				Wire
				Tie
				76
			74
	8