Weslo WLTL29014 user manual Operation and Adjustment, Performant Lube TM Walking Belt

Page 7

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBE TM WALKING BELT

Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat-

form. Such substances will deteriorate the walking belt and cause excessive wear.

having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not com- patible with GFCl-equipped outlets.

 

This product is for use on a nominal 120-volt circuit,

HOW TO PLUG IN THE POWER CORD

and has a grounding

plug that looks like the plug illus-

 

trated in drawing 1 below. A temporary adapter that

 

looks like the adapter illustrated in drawing 2 may be

DANGER: Improper connection used to connect the surge suppressor to a 2-pole

of the equipment-groundingconductor can

receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

 

result in an increased risk of electric shock.

 

 

 

 

 

 

Check with a qualified electrician or service-

 

 

 

 

 

man if you are in doubt as to whether the

 

 

 

 

 

product is properly grounded. Do not modify

 

_Grounded

 

Outlet

Box

the plug provided with the product--if it will

 

 

 

 

 

 

 

not fit the outlet, have a proper outlet

_"-I

_

 

Surge

Suppressor

installed by a qualified electrician.

 

II

__

U_J

Grounding Pin

 

Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home'spower. Voltage surges, spikes, and noise interference can result from weather conditions or from other appli- ances being turned on or off. To decrease the pos-

sibility of your treadmill being damaged, always use a surge suppressor with your treadmill (see drawing 1 at the right). To purchase a surge sup- pressor, see your local WESLO dealer or call 1- 800-806-3651 and order part number 146148.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a monitoring light on the surge suppressor to indi- cate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed or stop unexpect- edly, which may result in a fall and serious injury.

This product must be grounded. If it should mal- function or break down, grounding provides a path of least resistance for electric current to reduce the risk

of electric shock. This product is equipped with a cord

Grounded Outlet G_ounding Plug _

Outlet Box

Adapter

Metal Screw

The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician.

The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle outlet

box covers are not grounded. Contact a qualified electrician to determine if the outlet box cover is

grounded before using an adapter.

Image 7
Contents WWWWeSOCOm Customer HOT LineImportant Precautions Table of ContentsNevermovethewalkingbeltwhilethe power Front Before YOU BeginBack Right Side Harness 53 in the right Handrail AssemblyConsoleBaseImportant. Make sure that the Wires Performant Lube TM Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Installed by a qualified electricianBattery Installation Diagram of the ConsoleSTEP-BY-STEPCONSOLE Operation Eset the speed control and start the walking belt Insert the key fully into the power switchHOW to Change the Incline of the Treadmill Incline pins are inserted from the direction shownHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE HOW to Move the TreadmillProblem The power turns off during use Maintenance and TROUBLE-SHOOTINGPROBLEMThe walking belt slows when walked on Aerobic Exercise Conditioning GuidelinesExercise Intensity Fat BurningStretch Warm-upTraining Zone Exercise Toe Touch StretchKey No. Qty Description QtyIll Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT