Weslo WCTL26080 user manual

Page 13

PROBLEM: The walking belt is off-centre or slips when walked on

SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjust- ment bolt clockwise, and the right bolt counterclock- wise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centred.

b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjust- ment bolt counterclockwise, and the right bolt clock- wise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centred.

c. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjust- ment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 5 to 7 centimetres off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

PROBLEM: The walking belt slows when walked on

a

b

c

SOLUTION: a. Use only a CUL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be permanently damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counter- clockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 5 to 7 centimetres (2 to 3 inches) off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

5—7 cm

Rear Roller

Adjustment Bolts

c. I If the treadmill still will not run, please call our Customer Service Department, toll-free.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents
Model No. WCTL26080 Serial No QUESTIONS?Customer HOT Line Important Precautions Table of ContentsPage Front Before YOU BeginBack Right SideAssembly Inset drawing Tighten all parts used in assembly stepThat the notched end of the Frame Guide is at Bottom Ends of the batteries touching the springs. CloseHOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Step by Step Console Operation Diagram of the ConsoleMeasure your pulse, if desired Follow your progress with the monitor displayHOW to Select Kilometres and Miles HOW to Fold and Move the TreadmillHOW to Change the Incline of the Treadmill HOW to Fold the Treadmill for StorageHOW to Lower the Treadmill for USE HOW to Move the TreadmillProblem The power turns off during use Maintenance and TROUBLE-SHOOTINGPage Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description Part LIST-Model No. WCTL26080Remove this Exploded Drawing and Part List from the Manual Exploded Limited Warranty Ordering Replacement PartsIcon of CANADA, 900 de l’Industrie, St. Jérôme, QC J7Y 4B8
Related manuals
Manual 19 pages 24.55 Kb