Weslo WETL25905.1 user manual HOW to Lower the Treadmill for USE

Page 16

HOW TO LOWER THE TREADMILL FOR USE

1.Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the lock knob to the left and hold it. Pivot the frame down until it is past the lock pin. Slowly release the lock knob.

2.Hold the frame firmly with both hands, and lower the frame to the floor. Do not drop the frame to the floor.

To decrease the possibility of injury, bend your legs and keep your back straight.

Frame

Opened

 

Lock

 

Knob

 

Lock Pin

 

16

Image 16
Contents QUESTIONS? Model No. WETL25905.1 Serial NoTable of Contents Important Precautions Page Before YOU Begin FrontRight Side BackAssembly Page Crossbar Screws yet Screws and then tighten them Top ViewOperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt GFCI-equipped outletsConsole Diagram Features of the Console HOW to Turn on the PowerSelect the manual mode Insert the key into the consolePress the Start button or the Speed increase Button to start the walking beltHOW to USE a Speed Program Whenkey. you are finished exercising, removeMeasure your heart rate, if desired Insert the key fully into the consoleHOW to Change the Incline of the Treadmill When the program ends, remove the key from ConsoleMeasure your heart rate if desired HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyOrdering Replacement Parts Part Identification Chart Part LIST-Model No. WETL25905.1 Qty DescriptionR1005A