26
Basic operations
1

Turn on the power.

Turn on the power by following the instructions in “Turning the power on”
p.24
.
2

Selectthelanguage(Whenusingthersttime).

When the projector is used for the first time after purchase, the start menu for lan-
guage (to display the menus and messages on screen) and configuration is displayed
in English. (if the screen is out of focus, adjust it according to the step
6
.)

Use the , , or button to select the desired language and

press the button.

Message for setup confirmation is displayed in a selected language.

Notes

•Whentheprojectoristurnedonthenexttime,thestartmenudoesnotappearupon
startup.
•ThelanguagecanalsobesetviatheDefault setting menu
p.34
.
•Thisowner’smanualassumesthatEnglishhasbeenselected.
3

Activate the connected device.

Turn on and start the connected device such as a computer.
4

Press the INPUT button.

An image of the connected equipment is projected.
Each time you press the INPUT button, it switches to another source signal from the
equipment which is connected to the projector.

Notes

•When[Auto input search] is set to [On] in the Default setting menu
p.34
(factory
setting is [On]), the input is switched to the connected equipment that is outputting video
signals each time you press the INPUT button
p.43
.
•Rightaftertheinputsourceisswitchedtotheother,thecoloroftheimagemaychange
slightly.
English
French
German
Italian
Spanish
Portuguese
Russian
Swedish
Turkish
Romanian
Simplified Chinese
Traditional Chinese
Polish
Indonesian
Norwegian
Finnish
Czech
Hungarian
Greek
Danish
Dutch