20
■Operatingtheremote
control
Point toward the projector’s
infraredremotesensor,andpressa
buttonontheremotecontrol.
•Operatingtheprojectorfromthefront
Approx. 7m
Approx.15
Notes
•Whenyouuseforthersttimeafter
purchase, a plastic sheet is provided
between the battery and its contact. Be
sure to remove by pulling it off.
•Whenoperatingtheremotecontrolfrom
behind the projector, the infrared beam
is reflected on the projecting surface and
may travel a shorter distance to reach
the projector depending on the shape
and material of the projecting surface.
■ Loading a coin cell battery
intotheremotecontrol
jRemovethebatteryholder.
Hold down the side release firmly and pull
out the battery holder.
k Load a coin cell battery (CR2025).
Be sure to align the plus and minus ends
of the battery properly.
3
V
O
L
T
S
CR2025
l Replace the battery holder back
intotheremotecontrol.
M
3
V
O
L
T
S
CR2025
Coin cell battery
•Beforeusingthebattery,besuretoobservetheSafetyPrecautionsdescribedinprevious
pages.
•Removethebatteryfromremotecontrolwhennotusingforextendedperiods.
•Iftheremotecontrolstopsworking,orifitsrangedecreases,replacethebatterywitha
new one.
•Keepthebatteryawayfromthereachofchildren.Batteryischokinghazardandcan
be very dangerous if swallowed. If the battery is swallowed, seek medical assistance
immediately.
Theremotecontrol
•Theremotecontrolmayfailtooperateiftheinfraredremotesensorisexposedtobright
sunlight or fluorescent lighting.
•Donotdroporbang.
•Donotleaveinhotorhumidlocations.
•Donotallowittogetwetorplaceitontopofwetobjects.
•Donottakeapart.
•Inrarecases,ambientconditionscouldimpedetheoperationoftheremotecontrol.Ifthis
happens, point the remote control at the main unit again, and repeat the operation.